Centray Lube

All the advantages of an oil-based lubricant in a water based die lubricant

  • Added coolant to enhance cooling properties of water-based lubricant

  • Maximized adhesion to give you all the advantages of oil-based lubricant 

  • Improved surface finish with excellent adhesion at higher temperatures

  • Eliminate waste liquid with 1/10 dilution and pule spray

  • Increased die life with controlled cooling of die and improved adhesion

  • For best results, use with our Minimal Spray System

Maximize Adhesion

Experience the adhesion you would expect from an oil-based lubricant in a water-based solution

Release Agent

Application Method

Release Amount (ml/cycle)

Results

Recommended: 

Centray Lube

Pulse Spray

19

Excellent adhesion efficiency can be obtained even with a small coating amount.

Competing Water-Soluble Release Agent 

Competing Water-Soluble Release Agent 

Oily  Small Amount of Release Agent (Undiluted Solution)

Continuous Spray

Pulse Spray

Continuous Spray

190

19

19

Since a large amount is applied, the amount of waste liquid is large

Low adhesion-efficiency is observed, which can cause poor surface finish and the casting to stick to the die

Good adhesion ,but no cooling properties are observed

Improved Mold-Cooling Properties

Experience the mold-cooling properties of a water-based lubricant without damaging your die over time. Centray Lube contains advanced cooling agents that increase cooling properties to allow cooling with pulse spray patterns. Extend die life by avoiding the dramatic increases and decreases in die temperature often observed in continuous spray water-based lubricant

Release Agent

Application Method

Release Amount (ml/cycle)

Results

Recommended: 

Centray Lube

Pulse Spray

6

Improved lubricant adhesion, and maximized cooling properties without damage to the mold

Centray Lube

Undiluted Oil-Based Lubricant

Water Soluble Release Agent

Water Soluble Release Agent

Centray Lube

Continuous Spray

Continuous Spray

Continuous Spray

Continuous Spray

Continuous Spray

6

0.5

60

6

6

Improved cooling compared to competing water-based lubricant without damage to the die

Minimal mold-cooling is observed

Damage to mold overtime with large increases and decreases in die temperature

Minimal cooling effect due to thin coating

Improved cooling compared to competing water-based lubricant without damage to the die

Logo (White).png

RYOEI USA

8545 Challenger Dr, Indianapolis, IN 46241, USA

info@ryoei-usa.com

RYOEI Japan

RYOEI Thailand

©2020 by RYOEI

  • LinkedIn
  • YouTube
  • Facebook